[nsp] netflow on GSR

[matthew zeier]

(sorry - outlook errors)

I enabled sampling and am now seeing:

Aug 26 22:36:46 border3.irv.intelenet.net 6363: SLOT 2:Aug 26 22:36:44.978
PDT: %LC-6-PSALOWPRIUCODE: Currently using PSA Input ACL ucode; PSA Sampled
Netflow ucode is not enabled.

Is there a work-around for the input ACL?  I have an inbound ACL on my WAN
interfaces (simple ip access-list).

- mz


----- Original Message -----
From: "Bradley Dunn" <bradley@dunn.org>
To: "matthew zeier" <mrz@intelenet.net>
Cc: <cisco-nsp@puck.nether.net>
Sent: Monday, August 26, 2002 5:18 PM
Subject: Re: [nsp] netflow on GSR


> On Mon, 26 Aug 2002, matthew zeier wrote:
>
> > Running 12.0(17)S on a 120012.
> >
> > Netflow isn't sending traffic at the rate I'd expect it to (not at the
same
> > rate as my other 7500s).  I suspect there's some knob I forgot to turn
but
> > can't find it.
> >
> > Config looks like:
> >
> > interface GigabitEthernet2/1
>
> Configure sampling. See:
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
limit/120s/120s11/12s_sanf.htm
>
> Bradley
>
>