[nsp] version difference problem

[arun yadav yadav]

Hi All,
  I m having two cisco6509 switches in my office having two 
"WS-X6416-GBIC" modules each.I m moving one "WS-X6416-GBIC" from 
one switch to another.But i see version difference between two 
switches as shown below:

Catalyst cisco 6509 switch from which module will be REMOVED :

csnoida1a> show module 3
Mod Slot Ports Module-Type               Model               Sub 
Status
--- ---- ----- ------------------------- ------------------- ---
--------
3   3    16    1000BaseX Ethernet        WS-X6416-GBIC       no  
ok

Mod Module-Name         Serial-Num
--- ------------------- -----------
3                       SAD04281DT3

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ----------
-----------------
3   00-02-7e-24-44-38 to 00-02-7e-24-44-47 1.2    5.4(2)     
5.5(1)



Catalyst cisco 6509 switch in which module will be inserted :

noida-switch1> show module 5
Mod Slot Ports Module-Type               Model               Sub 
Status
--- ---- ----- ------------------------- ------------------- ---
--------
5   5    16    1000BaseX Ethernet        WS-X6416-GBIC       no  
ok

Mod Module-Name         Serial-Num
--- ------------------- -----------
5                       SAL0539C2Y2

Mod MAC-Address(es)                        Hw     Fw         Sw
--- -------------------------------------- ------ ----------
-----------------
5   00-05-9a-8f-92-d0 to 00-05-9a-8f-92-df 1.0    5.4(2)     
5.5(11)



1)Will this version difference create some porblem ?
2)If yes what r the steps for the solution ?
3)Pls suggest some document to understand the significance of all 
this version numbers?
Thanks in advance.

Thanks & Regards
Arun





__________________________________________________________
Give your Company an email address like
ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
Know more. http://www.rediffmailpro.com/signup/