[nsp] version difference problem

[Ryan O'Connell]

On 28 Aug 2002 06:35:50 -0000 arun yadav yadav <aruncisco@rediffmail.com> wrote:

> Hi All,
>   I m having two cisco6509 switches in my office having two 
> "WS-X6416-GBIC" modules each.I m moving one "WS-X6416-GBIC" from 
> one switch to another.But i see version difference between two 
> switches as shown below:
[snip]

The differences you see are for the hardware and firmware revisions of the
cards themselves, nothing to do with the switch. (The card in the second
switch is slightly older than the first one) These two cards will
co-exist quite happily in the same switch. You're running slightly
different Catalyst software on the two switches (5.5.1 vs. 5.5.11) but
both these versions are compatible with any hardware revision of that card.

-- 
      Ryan O'Connell
Mail: ryan@complicity.co.uk
  CV: http://www.complicity.co.uk/ryancv.pdf
      CCIE #8174