[nsp] vip4/80 help

[Stephen J. Wilcox]

I cant see any PAs listed - do you have PAs inserted into the VIP? I seem to
remember they wont boot if they're empty on both slots?

Steve


On Mon, 2 Dec 2002, Joshua Smith wrote:

> i just installed a vip4/80 in a 7513 and am not having any luck bringing
> the card up - i reloaded the router manually when the bus did not reset
> itself (i don't know that this was the way to do it) - does anyone have 
> any thoughts on this:
> 
> thanks
> 
> cr2-brd#sho diag 12
> Slot 12:
>         Physical slot 12, ~physical slot 0x3, logical slot 12, CBus 0
>         Internal Instruction Error, Microcode Status 0x8
>         Master Enable, LED, WCS DBUS Cmd Enable, WCS Loading, WCS Loaded
>         Board is disabled wedged
>         Pending I/O Status: Console I/O, Debug I/O, Msg I/O
>         EEPROM format version 1
>         VIP4-80 RM7000 controller, HW rev 2.02, board revision B0
>         Serial number: 18585436  Part number: 73-3143-02
>         Test history: 0x00        RMA number: 00-00-00
>         Flags: cisco 7000 board; 7500 compatible
> 
>         EEPROM contents (hex):
>           0x20: 01 22 02 02 01 1B 97 5C 49 0C 47 02 00 00 00 00
>           0x30: 58 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> 
>         Slot database information:
>         Flags: 0x291    Insertion time: 0x3F8C (00:17:06 ago)
> 
>         VIP Controller Memory Size: Unknown
> 
> cr2-brd#sho ver
> Cisco Internetwork Operating System Software
> IOS (tm) RSP Software (RSP-IK9O3SV-M), Version 12.2(11)T1,  RELEASE SOFTWARE
> (fc2)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Mon 30-Sep-02 14:20 by ccai
> Image text-base: 0x60010948, data-base: 0x61B64000
> 
> ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
> 
> cr2-brd uptime is 17 minutes
> System returned to ROM by reload at 17:30:06 EST Mon Dec 2 2002
> System restarted at 17:32:00 EST Mon Dec 2 2002
> System image file is "slot0:rsp-ik9o3sv-mz.122-11.T1.bin"
> 
> cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory.
> R7000 CPU at 250Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
> Last reset from power-on
> G.703/E1 software, Version 1.0.
> G.703/JT2 software, Version 1.0.
> X.25 software, Version 3.0.0.
> Bridging software.
> Chassis Interface.
> 2 VIP4-80 RM7000 controllers (1 FastEthernet)(4 Ethernet)(1 Serial)(1 POS).
> 4 Ethernet/IEEE 802.3 interface(s)
> 1 FastEthernet/IEEE 802.3 interface(s)
> 1 Serial network interface(s)
> 1 Packet over SONET network interface(s)
> 2043K bytes of non-volatile configuration memory.
> 
> 32768K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> 20480K bytes of Flash PCMCIA card at slot 1 (Sector size 128K).
> 16384K bytes of Flash internal SIMM (Sector size 256K).
> 
> Slave in slot 7 is running Cisco Internetwork Operating System Software
> IOS (tm) RSP Software (RSP-DW-M), Version 12.2(11)T1,  RELEASE SOFTWARE (fc2)
> TAC Support: http://www.cisco.com/tac
> Copyright (c) 1986-2002 by cisco Systems, Inc.
> Compiled Sat 28-Sep-02 00:00 by ccai
> Slave: Loaded from system
> Slave: cisco RSP8 (R7000) processor with 262144K bytes of memory.
> 
> Configuration register is 0x2102
> 
> cr2-brd#
> 
> 
> "Walk with me through the Universe,
>  And along the way see how all of us are Connected.
>  Feast the eyes of your Soul,
>  On the Love that abounds.
>  In all places at once, seemingly endless,
>  Like your own existence."
>      - Stephen Hawking -
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>