[nsp] --More--

[Roy]

/string will search for a string in the output.  Very handy for long "show
conf" output

Hank Nussbacher wrote:

> I happened to hit on this by chance and have not been able to find it
> documented anyplace within Cisco so I'll mention it here.
>
> When scrolling thru some output and you get the "--More--" prompt, normally
> one hits either ENTER or SPACE.  By mistake I hit "+" and then some text
> and the result is that the remaining text is filtered to display only lines
> with the characters listed.  "-" also works after a few tests (displays
> lines without the stated text-string).
>
> I also looked at the various Cisco undocumented IOS command sites and
> couldn't find this either.
>
> Enjoy,
> Hank
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/