[nsp] V.35 or G.703?+Undocumented commands

[Roman Popov]

On Wed, Dec 11, 2002 at 10:22:51AM +0200, Birsen Ozturk wrote:
> Hello
> Is there a way to understand whether the serial interfaces of 75xx
> series are of G.703 or V.35 type? (via show or some other commands)

show controllers cbus

ex:
    Serial8/6, applique is G.703 Balanced
      gfreeq 48000168, lfreeq 48000288 (1568 bytes)
      rxlo 4, rxhi 30, rxcurr 1, maxrxcurr 11
      txq 48000290, txacc 4800021A (value 21), txlimit 25

> Thanks in advance
> 
> Another thing I want to say, why Cisco keeps so many undocumented
> commands? What is the thing behind that? These are just the two of the
> commands I found out that are undocumented in past two days:
> bgp bestpath as-path ignore (under the router config ignores the as-path
> length while choosing the best path)
> ospf auto-cost reference-bandwith (again under the router-config changes
> the default ospf path cost which is 100Mb)
> 
> Birsen
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
wbw
Roman Popov