[nsp] V.35 or G.703?+Undocumented commands

[Birsen Öztürk]

When I said "undocumented" I meant that when you type "?" on command prompt these commands do not apper. That is frustrating.

7500(config-router)#bgp bestpath ?
  compare-routerid  Compare router-id for identical EBGP paths
  med               MED attribute

Birsen Ozturk

-----Original Message-----
From: Philip Smith [mailto:pfs@cisco.com]
Sent: 12 Aralýk 2002 Perþembe 09:50
To: nic@gblx.net
Cc: cisco-nsp@puck.nether.net
Subject: RE: [nsp] V.35 or G.703?+Undocumented commands


At 11:24 11/12/2002 +0000, Nic McCartney wrote:
>hey, he asked WHY you have so many un-doc'd commands, not if this was in the
>CCO or not ;-)

Asking why we have *so* many undocumented commands, and then giving two 
commands which are very well documented....? 0-)

Besides, Barry and I have documented several "undocumented" commands in the 
IOS Essentials whitepaper/ISP Essentials book.

philip
--
_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/