[nsp] analog modem in cisco 2611 ...

[Do-Risika RAFIEFERANTSIARONJY]

Hello evreybody,

Could someone tell me the sense of this log below ? The analog modem 
does'nt answer to calls anymore, though the phone line is ok.

I noticed the 'Model disabled' in the log, does this mean that the modem 
was disabled ? If yes, how to enable it ? or it is out of service ?

nas4.simicro.net#show modem log 1/2

Modem 1/2 Events Log:
00:53:50.756 DC session request: AT-I25Z
00:53:50.756 RS232: noCTS* DSR* noDCD* noRI  noRxBREAK  TxBREAK*
00:53:50.760 MSMP Reset
00:53:50.760 RS232: CTS* DSR  noDCD  noRI  noRxBREAK  TxBREAK
00:53:50.756 DTR set high
00:53:50.756 Modem disabled
00:47:31.615 Modem enabled
00:47:31.519 CSM: event-CLEAR_INTERFACE New State-RESET_STATE
00:47:29.459 Modem reset complete: success
00:47:29.463 CSM: event-MODEM_RESET_COMPLETE New State-IDLE_STATE
00:47:29.455 DC session request: AT-I25Z
00:47:29.123 DTR set low
00:47:29.123 Modem disabled
00:47:27.124 DTR set high
00:20:46.119 Modem enabled
00:20:46.019 CSM: event-CLEAR_INTERFACE New State-RESET_STATE
00:20:43.971 Modem reset complete: success
00:20:43.971 CSM: event-MODEM_RESET_COMPLETE New State-IDLE_STATE
00:20:43.959 DC session request: AT-I25Z
00:20:43.306 DTR set low
00:20:43.302 Modem disabled
00:20:41.303 DTR set high
nas4.simicro.net#


Thanks in advance,

-- 
Do-Risika RAFIEFERANTSIARONJY, SysAdmin
mailto:do-risika@simicro-internet.mg
________________
Simicro Internet, mailto:simicro@simicro.mg, http://internet.simicro.mg
Tel : (+261) 20 22 648 83 (GMT +3), Fax : (+261) 20 22 661 83