[nsp] 7500 + PA-2CE1/PRI -balanced
Oleksandr Pantus
alx at vsmu.vinnica.ua
Tue Dec 24 16:55:28 EST 2002
Hello !
On Tue, 24 Dec 2002, Yuval Ben-Ari wrote:
> Since the PA was added it is randomly causing VIP crash followed by all
> other VIPs being reset. (router is not reloading)
> I was told it is hardware problem, but already tried replacing most of
> the relevant parts.
> I am wondering if anyone has similar config and seen/haven't seen the
> problem.
We had the similiar problem. It had been fixed only when we removed other
PA (PA-4E) from VIP2-40 where PA-2CE1 were installed.
router> sh diag 2
Slot 2:
Physical slot 2, ~physical slot 0xD, logical slot 2, CBus 0
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP2 controller, HW rev 2.13, board revision A0
Serial number: 18597309 Part number: 73-1684-05
Test history: 0x00 RMA number: 00-00-00
Flags: cisco 7000 board; 7500 compatible
EEPROM contents (hex):
0x20: 01 15 02 0D 01 1B C5 BD 49 06 94 05 00 00 00 00
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0xE9B4C (8w2d ago)
Controller Memory Size: 64 MBytes DRAM, 2048 KBytes SRAM
PA Bay 1 Information:
Multi-channel (E1) PA, 2 ports
EEPROM format version 1
0x30: 50 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
Slot database information:
Flags: 0x4 Insertion time: 0xE9B4C (8w2d ago)
Controller Memory Size: 64 MBytes DRAM, 2048 KBytes SRAM
PA Bay 1 Information:
Multi-channel (E1) PA, 2 ports
EEPROM format version 1
HW rev 1.01, Board revision A0
Serial number: 06632416 Part number: 73-2463-01
--Boot log begin--
Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(7c), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 11-May-02 06:03 by pwade
Image text-base: 0x600109A8, data-base: 0x603E0000
--Boot log end--
--
S/Y,
Alexander, MD, nic-hdl: AJP1-UANIC
More information about the cisco-nsp
mailing list