[nsp] Merit Radius and Cisco authorization

[Lewis, Richard]

Hi Hank,

On my Merit RADIUS it is :

	Cisco:Cisco-Avpair = "shell:priv-lvl=15"

	..and don't forget the comma after the second line.

	If you debug the RADIUS you can see if it is happy with your Cisco AV-pair attribute or if it is "tossing" it.

	Regards,

	Richard




> -----Original Message-----
> From:	Hank Nussbacher [SMTP:hank@att.net.il]
> Sent:	Tuesday, July 23, 2002 8:43 AM
> To:	cisco-nsp@puck.nether.net
> Subject:	[nsp] Merit Radius and Cisco authorization
> 
> We are unable to get the Merit Radius to work properly with Cisco 
> authorization.  Authentication works ok but authorization doesn't work:
> seven Password = "eight"
> Service-Type = Shell-User
> Cisco-Avpair = shell:priv-lvl=15
> 
> Can someone send a working Merit Radius server config and the Cisco 
> commands you use for authorization:
> aaa authorization exec default radius if-authenticated
> 
> Thanks,
> Hank
> 
> _______________________________________________
> cisco-nsp mailing list
> cisco-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp


**********************************************************************
This message may contain information which is confidential or privileged.
If you are not the intended recipient, please advise the sender immediately
by reply e-mail and delete this message and any attachments
without retaining a copy.  

**********************************************************************