[nsp] vrf dialin

[Félix Izquierdo]

We are doing it successfully. You can do it with 12.2 if you need only
to route the IPCP peer address ( the connected route /32 ). If you need
to route > /32 using aaa, then you need 12.2(8)T because the support of
Framed-Route and Framed-Netmask vrf-aware.

Félix


Stefan Reelsen wrote:
> =

> Hello,
> =

> I´d like to terminate a dialin customer in a virtual instance (Cisco
> 3640) and transport the traffic over a vlan-tag (ethernet) to another
> device. Has anybody successfully done anything like this?
> =

> --
> Best regards,
>  Stefan                          mailto:stefan@reelsen.net
> =

> _______________________________________________
> cisco-nsp mailing list
> cisco-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp

-- 
______________________________________________________________________
DATAGRAMA SERVICIOS GLOBALES IP
C/ Acer 30                                       Pho: +34 93 289 63 00
08038 Barcelona ( SPAIN )                        Fax: +34 93 289 63 10
mailto:fizquierdo@datagrama.net               http://www.datagrama.net
______________________________________________________________________