[nsp] clear part channel config

[Chris Johns]

Folks,

Can anyone tell me how to/or if there is a way to delete the config after I 
have disabled an etherchannel, the Cisco documentation tells you how to 
disable the port channel but not how to delete the config. There is no 
technical reason to remove the config, I just wanted to keep the config 
tidy.


http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007f2c6.html

"This example shows how to disable an EtherChannel:

Console> (enable) set port channel 2/2-8 mode off
Ports 2/2-8 channel mode set to off.
Console> (enable)"

thanks
chris






_________________________________________________________________
Unlimited Internet access -- and 2 months free!  Try MSN. 
http://resourcecenter.msn.com/access/plans/2monthsfree.asp