[nsp] 7200 as ATM switch

[Siva Valliappan]

one possible solution in this scenario is to take advantage of
the 7200's ATM to FR (and vice versa) interworking capabilities.
you would be burning serial ports, but that is something that may
work for you....

cheers
.siva

On Mon, 4 Nov 2002, Majid Siddiq wrote:

> You can put an LS1010 in between telco and your 7200s.
>
> -----Original Message-----
> From: Benjie Ko [mailto:gerwalk1@yahoo.com]
> Sent: Monday, November 04, 2002 3:40 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] 7200 as ATM switch
>
> Hello,
>
> Can the ff setup be accomplished:
>
> telco atm switch
> |
> OC3 ATM
> |
> 7200-1 with 2 PA-A3-OC3SMI
> |
> OC3 ATM connection (back-to-back)
> |
> 7200-2 with PA-A3-OC3SMI
>
>
>
> Right now we're mapping customer circuits on the 1st
> 7200 (7200-1) including our main internet links. We'd
> like to map some of our circuits to another 7200
> (7200-2) to segragate customer links from our internet
> links.
> Since the telco will only give us 1 STM-1 port, is it
> possible to do the above configuration (7200-1 acting
> as a ATM switch)? Any other solutions?
> Thanks.
>
>
> __________________________________________________
> Do you Yahoo!?
> HotJobs - Search new jobs daily now
> http://hotjobs.yahoo.com/
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>