[nsp] External device to do IMA of T1 trunks?

[Todd, Douglas M.]

Brian:

Cisco does have IMA T1 modules for 36/26 type chassis.  Is this a
possibility?
if not you might want to look at Atran:

 Total Access 3000 Octal DS1 IMA Module

Total Access 3000 ATM Access Module
 
 
Other makers surely do offer some IMA type product.

==DMT>

> -----Original Message-----
> From: Brian [mailto:signal@shreve.net]
> Sent: Wednesday, November 06, 2002 9:12 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] External device to do IMA of T1 trunks?
> 
> 
> 
> I need to bring a few ATM T1's together into an IMA group.  
> This is on 
> a LS1010.
> I do not have the expensive C85MS-8T1-IMA module.  I was wondering if 
> its
> possible to bring the T1's into an external IMA device that will 
> combine them
> into a DS3 or OC3 aggregate that I can shoot over to the 
> LS1010.  Does 
> such
> a device exist? Expensive?
> 
> Brian
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>