[nsp] 6500 Native IOS ACLs

[Clinton Work]

I have a 6500 Sup2/MSFC2 running Native IOS 12.1(8b)E9 (Service Provider w/VIP)
and I'm trying to determine if all the ACLs are processed in hardware. There
is fairly high CPU usage, but the tcam and fm commands look normal. Any
suggestions.

The box dosn't have any DFC enabled cards and its pushing around 500Mbps of
traffic.

router#show proc cpu | ex 0.00
CPU utilization for five seconds: 49%/49%; one minute: 52%; five minutes: 52%
 PID  Runtime(ms)  Invoked  uSecs    5Sec   1Min   5Min TTY Process
  52    11819592  38318581    308   0.16%  0.05%  0.06%   0 IP Input
 118     7366940  11559003    637   0.08%  0.03%  0.02%   0 ISIS Upd BACKBON


router#show tcam counts
           Used            Free            Percent  Used
           ----            ----            -------------
 Labels:      5             507                0

ACL_TCAM
  Masks:   3472             624               84
Entries:   6430           26338               19

QOS_TCAM
  Masks:      1            4095                0
Entries:      1           32767                0

    LOU:      0              64                0
  ANDOR:      0              16                0
  ORAND:      0              16                0

router#show fm summary
Interface: GigabitEthernet1/1
  TCAM screening for features is ACTIVE outbound
Interface: GigabitEthernet1/2
  TCAM screening for features is ACTIVE outbound
Interface: GigabitEthernet2/1
  TCAM screening for features is ACTIVE outbound
Interface: GigabitEthernet2/2
  TCAM screening for features is ACTIVE outbound
Interface: Vlan221
  TCAM screening for features is ACTIVE outbound
Interface: Vlan222
  TCAM screening for features is ACTIVE outbound


-- 
=========================================================================
Clinton Work                                        clinton@scripty.com
Calgary, Alberta