[nsp] dot1q causes port error?

[Tomas Daniska]

... not mentioning all the new bugs in qos cli that come with latest
12.2 releases

--

deejay 

> -----Original Message-----
> From: Stephen J. Wilcox [mailto:steve@telecomplete.co.uk] 
> Sent: 26. novembra 2002 14:07
> To: Tomas Daniska
> Cc: Temkin, David; cisco-nsp@puck.nether.net
> Subject: RE: [nsp] dot1q causes port error?
> 
> 
> Ok,
>  I think I have this bug!
> 
> CSCdw50638 - Incrementing underruns on Fast Ether -
> DEC21140-3-UNDERFLO. Affecting 12.1(11) to  12.2(9.2)
> 
> So.. back to my which IOS now thread..
> 
> Well lets see .. we have the bug above, we have
> CSCdx68871 - 7200 with dot1q may align and reload - 
> 12.2(5)-12.2(11.3) 
> 
> and
> 
> CSCcv86717 - FE i82543 may become wedged. 12.1(1)- 12.2(7)
> 
> So seems that rules out anything from 12.1(1) from 12.2(11). Nice!
> 
> So as my hardware also requires minimum 12.1(8)EC that means 
> I can only use
> 12.2(12) and higher... hrmmmm. 
> 
> All I am doing is running a fast ethernet on a 7200/225 with 
> dot1q. You'd have
> thought IOS choice would be simpler!
> 
> Steve
> 
> -- 
> Stephen J. Wilcox
> BSc (Hons).  CCIE #10730
> Technical Director, Telecomplete
> http://www.telecomplete.co.uk/
> 
> On Tue, 26 Nov 2002, Stephen J. Wilcox wrote:
> 
> > MPLS isnt enabled on this .. I have seen similar tho where 
> MPLS is enabled
> > however on the switches where I saw it the giant counter 
> increased only, not
> > crc's etc 
> > 
> > Steve
> > 
> > 
> > 
> 
>