[nsp] 802.1Q question

[Narayan, Krishnan]

Thanks David. I tried 12.2.2T, no support. Also, does the IP only
version work or do i need the IP plus version.

-k

-----Original Message-----
From: Temkin, David [mailto:temkin@sig.com]
Sent: Tuesday, November 26, 2002 11:41 AM
To: Narayan, Krishnan; cisco-nsp@puck.nether.net
Subject: RE: [nsp] 802.1Q question


Non Fast Ethernet support of 802.1q started in 12.2.2T... So you have to
start there if you intend on using it on a 2611.

It's been supported on FastE's since like 12.1.2T if I remember
correctly.

-Dave

> -----Original Message-----
> From: Narayan, Krishnan [mailto:knarayan@idirect.net] 
> Sent: Tuesday, November 26, 2002 11:38 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] 802.1Q question
> 
> 
> All: I have a 2611 router, the question is what version on 
> IOS support 802.1Q (VLAN Tag encapsulation) , also do i need 
> to install IP version only or IP Plus version.
> 
> Thanks in advance
> krish
> 
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net 
> http://puck.nether.net/mailman/listinfo/cisco-> nsp
> archive at 
> http://puck.nether.net/pipermail/cisco-nsp/
> 


IMPORTANT:The information contained in this email and/or its attachments
is
confidential. If you are not the intended recipient, please notify the
sender immediately by reply and immediately delete this message and all
its
attachments.  Any review, use, reproduction, disclosure or dissemination
of
this message or any attachment by an unintended recipient is strictly
prohibited.  Neither this message nor any attachment is intended as or
should be construed as an offer, solicitation or recommendation to buy
or
sell any security or other financial instrument.  Neither the sender,
his or
her employer nor any of their respective affiliates makes any warranties
as
to the completeness or accuracy of any of the information contained
herein
or that this message or any of its attachments is free of viruses.