[nsp] E1 connection problem help me out

[Nic McCartney]

This is a multi-part message in MIME format.

------=_NextPart_000_004B_01C2963B.8A278D80
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit

How about Blackbox (MTU9000 or 9001) or Patton Electronics (2707) equipment.


Nic


-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Munit Singla
Sent: 27 November 2002 17:04
To: cisco-nsp@puck.nether.net
Subject: [nsp] E1 connection problem help me out


Hi All

 We have the following topology for connecting two E1 cards(NM2CE1B)
using external CSU/DSU.

(NM2CE1B)[DB15]<----->[csu/dsu]--------------[csu/dsu]<------->[DB15](NM2CE1
B)






If anybody has the setup similar to this, could you provide product
information on this CSU/DSU.

or if any other way for connecting E1 connections back to back for
specific above network module.


Regards
Singla
I would be very thankful if you pass me this inf ASAP

_______________________________________________
cisco-nsp mailing list  cisco-nsp@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

------=_NextPart_000_004B_01C2963B.8A278D80
Content-Type: text/x-vcard;
	name="Nic A McCartney.vcf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="Nic A McCartney.vcf"

BEGIN:VCARD
VERSION:2.1
N:McCartney;Nic;A
FN:Nic A McCartney
ORG:Global Crossing
TITLE:Data Operations Engineer
TEL;WORK;VOICE:+44 (0) 208-510-3084
ADR;WORK:;;240 East India Dock Road;London;;E14 9YY;England
LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:240 East India Dock =
Road=3D0D=3D0ALondon E14 9YY=3D0D=3D0AEngland
EMAIL;PREF;INTERNET:nic@gblx.net
REV:20020614T075942Z
END:VCARD

------=_NextPart_000_004B_01C2963B.8A278D80--