[nsp] Cat6500 reflexive ACL issues.

[Antoine Versini]

On Fri, 29 Nov 2002, David J. Hughes wrote:

> If your TCAM utilisation is getting a bit high there's quite an easy
> fix.  Cisco call it a sup2  ;-)

Hehe :-) In fact all the Cat6500 of our networks are allready powered by
sup2 w/ PCF2 and MSFC2...

TCAM's capacity was not the issue, but rather was the number of LOU's
used by an ACL. I managed to reduce LOU's utilization by reducing the L4
entries mathing TCP/UDP ports ranges...

Regards,
Antoine.