[nsp] What version of IOS should I be using...?

[Alex Rubenstein]

I'm fairly certain dot1q requires IP Plus.


On Wed, 9 Oct 2002, Ryan Spott wrote:

> I have a 7206vxr with a pa-t3 card in it.
>
> I would like to do the following with it:
>
> BGP
> Vlan Switching dot1q
> support more than one fast ethernet interface.
>
> My current IOS: Version 12.1(2) does not allow for me to make dot1q
> sub interfaces on the existing ethernet card.
>
> Could anyone here make any recommendations or point me at a Cisco web
> page that would guide me through this?
>
>
> Thanks in advance (and thanks for letting me lurk :)
>
>
> ryan
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- Alex Rubenstein, AR97, K2AHR, alex@nac.net, latency, Al Reuben --
--    Net Access Corporation, 800-NET-ME-36, http://www.nac.net   --