[nsp] PA-8T bandwidth

[George Boulescu]

I have a VIP2-40 with a PA-4T+ (4x2Mbps) in a 7513.
Two 6Mbps serials and one 2Mbps.
Works great.
Of course, I didn't get 12Mbps fullduplex on that PA, it is impossible.
But if your traffic will not be symetrical, then I think that you will not
run into any trouble using 4x2Mbps and 2x4Mbps.

> I have 7206VXR router with PA-8T-V35.
> Is it possible to use four 2Mbps serials and two 4Mbps serials
> concurrently?
> 4Mbps serials above use direct DTE-DCE cable connection.
> I searched many documents, but they just say,
> "up to eight 2Mbps serials, up to four 4Mbps serials or up to two 8Mbps
> serials is possible."
>
> Best regards,
> -----
> Kouji Baba
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 

George Boulescu
Senior Network Engineer
RoEduNet Bucharest NOC
CCAI, CCNA