[nsp] How to see GSR linecard cpu loading ?

[Pierfrancesco Caci]

:-> "Chris" == Chris Whyte <cwhyte@microsoft.com> writes:

    > Check out:
    > ftp://ftp.cisco.com/pub/mibs/v2/CISCO-PROCESS-MIB.my

    > I think it was added in 21S (for the LC cpus).

Hi...

CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.1 = INTEGER: 0
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.2 = INTEGER: 69
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.3 = INTEGER: 74
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.4 = INTEGER: 46
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.5 = INTEGER: 56
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.6 = INTEGER: 65
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.7 = INTEGER: 63
CISCO-PROCESS-MIB::cpmCPUTotalPhysicalIndex.9 = INTEGER: 51


How do I match this to the actual slot on the router ? Is there a
different MIB that will provide me this info? I did a walk of the
entire ciscoprocessmyb and I couldn't find it.

Thanks again

Pf

-- 

     This E-Mail has NOT been scanned for viruses, so it may be NOT CLEAN.
                         Wash your hands before meals.

-------------------------------------------------------------------------------
 Pierfrancesco Caci |            System Administrator @ seabone.net
 p.caci@seabone.net |     Telecom Italia S.p.A. - International Wholesale Svcs
     Linux paperino 2.4.20-pre5 #1 Tue Sep 10 16:45:34 CEST 2002 i686 unknown unknown GNU/Linux