[nsp] hand-made cross-over X21

[Daniska Tomas]

nope


   dce----dte
 (2,9)---->(4,11)
(3,10)---->(5,12)
(4,11)<----(2,9)
(5,12)<----(3,10)
(6,13)---->(6,13)


braces mean a twisted-pair, arrows show actual signal direction


--

deejay=20

> -----Original Message-----
> From: odusseus [mailto:odusseus@voila.fr]=20
> Sent: 30. okt=F3bra 2002 11:13
> To: cisco-nsp
> Subject: [nsp] hand-made cross-over X21
>=20
>=20
> Hi,
>=20
> I made a cross over X21 in order to connect two routers back to back.
> =20
> router-----Male X21----Converter-----Male X21------Router
> =20
> Please, can someone have a look at my converter?
> =20
> pin 1--------------shield GND------------------pin1
> pin 2--transmit + -------------receive + -----pin4
> pin 3--control + ---------------indication + --pin5
> pin 4--receive + ---------------transmit + ----pin2
> pin 5--indication + ------------control + ------pin3
> pin 6------------------timing + -------------------pin6
> =20
> pin 8---------------control GND ----------------pin8
> pin 9--transmit - ---------------receive - ------pin11
> pin 10--control - ---------------indication - ---pin12
> pin 11--receive - ---------------transmit - -----pin9
> pin 12--indication - ------------control - -------pin10
> pin 13-----------------timing - ---------------------pin13
> =20
> =20
> Thank you.
> =20
> Regards,
> =20
> Christophe
> ------------------------------------------
>=20
> Faites un voeu et puis Voila ! www.voila.fr=20
>=20
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>=20