[nsp] MPLS on 26xx ?

[Nic McCartney]

This is a multi-part message in MIME format.

------=_NextPart_000_000C_01C28007.EAD047C0
Content-Type: text/plain;
	charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Sure is.....

You can use 12.0S. Images can be found on ftp-eng.cisco.com
Not supported by Cisco but work. Use anonymous login
and look under /isp.

Regards, 

Nic

-----Original Message-----
From: cisco-nsp-admin@puck.nether.net
[mailto:cisco-nsp-admin@puck.nether.net]On Behalf Of Michael Vasilenko
Sent: 29 October 2002 20:29
To: cisco-nsp@puck.nether.net
Subject: [nsp] MPLS on 26xx ?


Hello!

One question - is it possible to run MPLS (edge or LSR) on 26xx?
Any experience? Right IOS?

-- 
Michael Vasilenko
_______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

------=_NextPart_000_000C_01C28007.EAD047C0
Content-Type: text/x-vcard;
	name="Nic A McCartney.vcf"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="Nic A McCartney.vcf"

BEGIN:VCARD
VERSION:2.1
N:McCartney;Nic;A
FN:Nic A McCartney
ORG:Global Crossing
TITLE:Data Operations Engineer
TEL;WORK;VOICE:+44 (0) 208-510-3084
ADR;WORK:;;240 East India Dock Road;London;;E14 9YY;England
LABEL;WORK;ENCODING=3DQUOTED-PRINTABLE:240 East India Dock =
Road=3D0D=3D0ALondon E14 9YY=3D0D=3D0AEngland
EMAIL;PREF;INTERNET:nic@gblx.net
REV:20020614T075942Z
END:VCARD

------=_NextPart_000_000C_01C28007.EAD047C0--