[nsp] Virtual templates for ISDN users

[Scott]

Here's the fix:

interface Virtual-Template x
 mtu 1501
 ip mtu 1500


HTH,
Scott



----- Original Message -----
From: "jc" <jc@isnet.net>
To: "Brandon" <dejavu@hivemind.net>
Cc: <cisco-nsp@puck.nether.net>
Sent: Sunday, September 01, 2002 11:53 AM
Subject: Re: [nsp] Virtual templates for ISDN users


> On Tue, 27 Aug 2002, Brandon wrote:
>
> > Hi guys,
> >
> > I have a situation as follows, which I just can't seem to iron out:
> >
> > - I have two groups of users, some using analogue dial-ups, some using
64K ISDN dial ups and some using 128K ISDN dial ups. The analogue dial ups
does not conern
> >   me that much at this moment, but I'm running into problems with the
64K and 128K dial ups.
> >
> > - Users using 128K dial ups are having difficulty connecting to secure
sites. Most straightforward pages, work, but portals and secure sites only
seem to load partly and
> >   then seems to 'freeze'.
> > I initially thought this to be a problem with the MTU sizes, but this
does not seem to be the case.
>
> sounds to me like you might have 'ip mtu' set on the vi temp. i suggest
> you disable it, and then try again. (when connected up, do a 'sh int vi
> xxx conf')
>
>
> j.
>
>
> #include <std-disclaimer.h> - 'save the trees, send an email'
>
>
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/