[nsp] NVRAM error 6500

[Todd, Douglas M.]

Chris:

Hmmm.... Can you save the file to flash and read it?  copy startup sup-bootflash
or copy run sup-bootflash?

Is this in production or is it a new installation?  If this is not in production
does it work with one sup?
Has ever worked or is this a new install? 

You might want to make sure it is not a bug w/dual sups on the 6500 in Native or
you have a corrupt nvram.

Lastly, depending on the outcome of the above you could have a corrupt nvram or
your startup config just does not exist in nvram. When you reboot do you get a
startup script or does it load the config?

==DMT>

> -----Original Message-----
> From: Chris Johns [mailto:chrisjohns_cisco@hotmail.com]
> Sent: Thursday, September 05, 2002 7:53 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] NVRAM error 6500
> 
> 
> Folks,
> 
> I am getting the following error when I do a sh start on my 
> Cat6500 running 
> nativeIOS;
> 
> BNE-DIST01#sh start
> Using 66728 out of 391160 bytes
> %Error opening nvram:/startup-config (Invalid Checksum)
> BNE-DIST01#
> 
> I have used the commmand "erase nvram" but to no avail, has 
> anyone got any 
> suggestions as to a possible fix.
> 
> Please note, we have 2 msfc's and can read the startup-config in the 
> slavenvram.
> 
> thanks
> Chris
> 
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>