[nsp] 7500 insertion force
joe mcguckin
joe@via.net
Fri, 06 Sep 2002 09:52:14 -0700
My guess is that the chassis may have experienced shipping damage and is no
longer 'square'.
Joe
On 9/6/02 8:17 AM, "Cisco Geek Rotation" <cisco@peakpeak.com> wrote:
> I recently got a 7507 chassis.
>
> It takes a huge amount of force to seat cards in certain slots. One
> problem I noticed is that if I have a VIP in Slot 1 and try to put an RSP
> in Slot 2, I can't. I have to pull the VIP card first, then put the RSP
> card in, then the VIP card can go in. In other words, the order you put
> cards in the chassis is important for some reason. It's as though the
> chassis has an alignment problem of some kind.
>
> Is this just how this beast works? Seems wild to have to take down an
> entire VIP to hotswap an RSP.
>
>
> Chris
>
>
> _______________________________________________
> cisco-nsp mailing list real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>