[nsp] PPPoE on 2600 Series?

[Josh Duffek]

hint: read the 12.2 docs :)

yeah it is supported from 12.1(3)XG and up I believe...so if you run
12.2mainline code it should be there.  havent tested it myself though.

http://www.cisco.com/warp/public/794/wicadsl_pppoe_client.html

all,
joshd.

----- Original Message -----
From: "Brian" <signal@shreve.net>
To: <cisco-nsp@puck.nether.net>
Sent: Monday, September 09, 2002 5:42 PM
Subject: [nsp] PPPoE on 2600 Series?


>
> I am wanting to do "PPPoE on ATM" on the 2600 Series, using a NM-4T1-IMA
> card.  According to
>
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
> t/121t1/dtpppoe.htm#xtocid251376
>
>
> The 2600 does not support PPPoE on ATM.  Does anyone know if Cisco since
> has released an image that will support PPPoE on ATM, or do I pretty much
> have to use the 3600 series with that module to do this.  This is to
> terminate DSL ATM VC's and run PPPoE over them.
>
> Thanks, appreciate the help.
>
> Brian
>
> -----------------------------------------------
> Brian Feeny, CCIE #8036    e: signal@shreve.net
> Network Engineer    p: 318.222.2638x109
> ShreveNet Inc.    f: 318.221.6612
>
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>