[nsp] GEIP+ and GBIC-ZX

Rubens Kuhl Jr. rkjnsp@ieg.com.br
Mon, 16 Sep 2002 14:47:13 -0300


The pps spec of the GEIP+ may be achieved turning off ACLs and NetFlow...
which makes your router a very fast sitting duck on hostile networks.

The only reason I see for buying GEIP+ cards is such a shortage of money
that makes you take bad investment decisions in order to survive. Cisco GSRs
with only Engine-3 or the 10-port GigE line-cards and Juniper M-series are
the ways to go in backbone/wan environments;  Cisco 7600, Juniper M and
Foundry with JetCores are more suitable choices  for datacenter/metro
environments.


Rubesn




----- Original Message -----
From: "Manolo Hernandez" <manolo@dialtone.com>
To: "German Martinez" <gmartine@mafalda.opentransit.net>
Cc: "Hank Nussbacher" <hank@att.net.il>; <cisco-nsp@puck.nether.net>
Sent: Thursday, September 12, 2002 10:04 AM
Subject: Re: [nsp] GEIP+ and GBIC-ZX


| We are experiencing several issues with the GEIP+ cards. The most
| important one is that they do not reach no where near the pps cisco
| specifies. They seem to be as tempermental as the ones on the GSRs. In
| my opinion you are better off leaving cisco and going with Juniper or
| Foundry.
|
| On Wed, 2002-09-11 at 10:23, German Martinez wrote:
| > I'd like to hear as well about the GEIP+ cards.
| > Anybody experiencing any kind of issues with those linecards ?
| >
| > We intent to put two of them in a single Cisco 7513.
| >
| > Thanks
| > German
| >
| > On Wed, 11 Sep 2002, Hank Nussbacher wrote:
| >
| > > Running 12.0(21)S2 on two routers - a 7507 and a 7513.  GEIP+ with
GBIC-ZX
| > > installed in each.
| > >
| > > On 1 router we get:
| > > Interface GigabitEthernet0/0(idb 0x60A4F2A0)
| > > Hardware is 82543 (rev 2), network connection mode is auto
| > > network link is up
| > > loopback type is none
| > > GBIC type is 1000BaseZX
| > >
| > > and on the other router we get:
| > > Interface GigabitEthernet0/0(idb 0x60A4F2A0)
| > > Hardware is 82543 (rev 2), network connection mode is auto
| > > network link is up
| > > loopback type is none
| > > GBIC type is unknown 0
| > >
| > > Playing with the GBIC and the card we get inconsistent results.
Anyone
| > > know of any problems with GBIC-ZX's and GEIP+ cards?
| > >
| > > Thanks,
| > > Hank
| > >
| > > _______________________________________________
| > > cisco-nsp mailing list  real_name)s@puck.nether.net
| > > http://puck.nether.net/mailman/listinfo/cisco-nsp
| > > archive at http://puck.nether.net/pipermail/cisco-nsp/
| > >
| >
| > _______________________________________________
| > cisco-nsp mailing list  real_name)s@puck.nether.net
| > http://puck.nether.net/mailman/listinfo/cisco-nsp
| > archive at http://puck.nether.net/pipermail/cisco-nsp/
| >
| --
| Manolo Hernandez - Network Administrator
| Dialtone Internet - Extremely Fast Linux Web Servers
| phone://954-581-0097  fax://954-581-7629
| mailto:manolo@dialtone.com  http://www.dialtone.com
| "The only source of knowledge is experience." - A. Einstein
|
| _______________________________________________
| cisco-nsp mailing list  real_name)s@puck.nether.net
| http://puck.nether.net/mailman/listinfo/cisco-nsp
| archive at http://puck.nether.net/pipermail/cisco-nsp/