[nsp] dial up access router configuration

[Josh Duffek]

That page, afaik, is going away.(to be replaced by something better...or so
they say) If you dont want it to put feedback on the site...I can only
scream so loud.

joshd.

----- Original Message -----
From: "Diego Costa" <diego.costa@ifxnw.com.uy>
To: "arun yadav yadav" <aruncisco@rediffmail.com>
Cc: <cisco-nsp@puck.nether.net>
Sent: Wednesday, September 18, 2002 8:30 AM
Subject: Re: [nsp] dial up access router configuration


I believe that this is a very good document!.
http://www.cisco.com/warp/public/793/access_dial/

I have a similar solution but with a 2511 and modems connected to async
lines.


Diego

El mié, 18-09-2002 a las 05:58, arun yadav yadav escribió:
> Hi All,
>   I m configuring a 3640 router as a remote access dial up router
> for our central office.It is having a 16 port Analog Modem Port
> Adapter(pm-16admodem).
>   Can you pls suggest some document which has step by step
> procedure of configuring the same.
> Thanks & Regards
> Arun
> __________________________________________________________
> Give your Company an email address like
> ravi @ ravi-exports.com.  Sign up for Rediffmail Pro today!
> Know more. http://www.rediffmailpro.com/signup/
>
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


_______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/