[nsp] 12.0(21)S4

[Casassa, Nathan]

I believe this is it:

CSCin15495 Bug Details 
    
The output counters associated with an interface might remain zero even
though
we are passing traffic through the interface. There is no workaround for
this
probelm.
 

-----Original Message-----
From: Steven W. Raymond [mailto:steven_raymond@eli.net] 
Sent: Wednesday, September 18, 2002 7:04 PM
To: Gert Doering
Cc: cisco-nsp@puck.nether.net
Subject: Re: [nsp] 12.0(21)S4


Has a bug ID been generated for this issue yet?
Thanks

Gert Doering wrote:
> 
> Hi,
> 
> On Wed, Sep 04, 2002 at 09:44:00PM -0700, Benjie Ko wrote:
> > I just upgraded to above IOS of our 7200 npe300. Has
> > anyone have problems with outgoing counters on all interfaces? 
> > Router PA-2T3+ and FE and mrtg suddenly "lost" or cant get any data 
> > for outgoing traffic for both interfaces? Any fixes on this? Should 
> > i avoid this IOS version?
> 
> We went back to 12.0(21)S1 because of this.  All output interface 
> counters in that box (FE, T3, POS-OC3) completely stopped working.
> 
> I have no bug id, but I'm still amazed that this image went through 
> quality control (especially given the fact that the interface counters 
> have always been broken - and if they change something at the way they 
> work, they'd better test them afterwards...)
> 
> gert
_______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/