[nsp] to tell WIC-2T from WIC-2A/S

[Jared Mauch]

	Try 'sh diag'

On Fri, Sep 20, 2002 at 08:59:32PM +0700, Victor Sudakov wrote:
> Colleagues,
> 
> There are a WIC-2T and a WIC-2A/S modules in a c2610. Their interfaces
> are visible as Serial0/0 to Serial0/3. Is there a way to tell whether
> a particular interface belongs to a WIC-2T card or to a WIC-2A/S card?
> The "show controller" output for all the four interfaces seems
> identical.
> 
> Thanks a lot for any input.
> 
> -- 
> Victor Sudakov,  VAS4-RIPE, VAS47-RIPN
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared@puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.