[nsp] 7206 NPE200 running out of memory ?

[Ezequiel Carson]

how many prefixes have you learned?


NPE-200 does not support more that 128M DRAM,so if you need full bg,p
you should upgrade upto NPE-300/400 or higher..


what is the Largest(b) value in the "sh memory summ" command?

Ezeq.


On Sat, 2002-09-21 at 19:21, joe mcguckin wrote:
> Does this sound right?
> 
> I have a 7206/NPE-200 running OSPF and BGP. It has 128M DRAM.
> 
> >sh proc mem
> 
> Total: 86104352, Used: 84174872, Free: 1929480
> .
> .
> .
>    0   0   16840416    2700976      10624     216992          0 *Dead*
>    5   0      22380   14433912       6924      15228  365290272 Pool Manager
>   68   0  379687684          0      20048  364109040          0 IP Input
>   69   0     747024     746940       6912          0          0 BGP Open
>  125   0   21824428    7050292     591876          0      18240 OSPF Router
>  126   0   74615764    1659916   72625772          0          0 BGP Router
>  127   0      65580          0       6864          0          0 BGP I/O
>  128   0      23792     399292      32852          0          0 BGP Scanner
>                                  84165352 Total
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>