[nsp] T3 unchannelized problem

[kyu@opnet.com]

Nick,

You need 12.0(14)S.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limi
t/120s/120s14/12s_ct3.htm

Kent

----- Original Message ----- 
From: "Nick Kraal" <nick@arc.net.my>
To: <cisco-nsp@puck.nether.net>
Sent: Sunday, September 22, 2002 7:10 AM
Subject: [nsp] T3 unchannelized problem


> We are installing a PA-MC-T3+ in a 7206VXR and trying to configure the
> circuit as a full T3 line -unchannelized. We can see the command 'no
> channelized' in the leg-B 7507 router but not in the 7206. I can't believe
> that the 7206 cannot work in an unchannelized configuration. Is there
> something we are missing out in the T3 controller?
> 
> Any ideas/help/pointer would be great;y appreciated.
> 
> Thanks in advance.
> 
> -nick/
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  real_name)s@puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/