[nsp] Question on UPS Power requirements

[Kerpal.Abdar]

Hi all.  Sorry for the post but perhaps someone
can help me out.  We have a
6509 with what I believe is a 1800 watt p/s, 16
amp but we only have half of
the slots filled.  My question is.......When
figuring the calculation to size
an APC UPS,  can I assume my power requirement
for the 6509 is about half the
stated rating (since I am only using about half
the slots)?  
Is the 1800 watt, 16 amp the maximum at full
load?


Kerpal