[nsp] 2 BGP sessions on a 7200 VXR?

[Spin]

60% cpu  with only ONE BGP session active now and 200Mbps traffic, we 
plan to add onother fe with the new session). 12.2M as IOS.

Spin


On Thursday, April 24, 2003, at 01:35  AM, Ezequiel Carson wrote:

> please explain me how!!??
>
>  i have 7206vxr-npe300  256 MB passing from X int to Y int 120 MB and
> cpu is using 85% :(
>
> running MPLS. also!
>
>
> Ezeq.
>
>
> On Wed, 2003-04-23 at 19:59, Spin wrote:
>> We have 300Mbit/s of aggregate traffic on 3 interface FE interface.
>>
>> Thanks
>>
>> On Thursday, April 24, 2003, at 12:37  AM, Ejay Hire wrote:
>>
>>> Is it enough memory and cpu, absolutely.  Will it handle your traffic
>>> load?  Probably, but you didn't give enough information  .  A 7206 
>>> VXR
>>> can handle multiple ds3's of throughput.
>>>
>>> -Ejay
>>>
>>> -----Original Message-----
>>> From: mac at telvia.it [mailto:mac at telvia.it]
>>> Sent: Wednesday, April 23, 2003 5:23 PM
>>> To: cisco-nsp at puck.nether.net
>>> Subject: [nsp] 2 BGP sessions on a 7200 VXR?
>>>
>>>
>>> Hi,
>>>
>>> is feasible to configure two eBGP4 sessions (one peering and a one 
>>> full
>>> route)  on a edge 7260VXR-NPE300 with 256MB of ram without compromise
>>> performance???
>>>
>>> Thanks
>>>
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> http://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>> <smime.p7s>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>