[nsp] Automated tool for catching duplex mismatches on switc h ports?

[Temkin, David]

Nope, it still does in Hybrid mode... Actually I'd rather it does anyway
until we have a better system for detecting them - gives the sysadmin who
screwed it up a nice wake up call.

-----Original Message-----
From: Jared Mauch [mailto:jared at puck.nether.net] 
Sent: Thursday, April 24, 2003 4:57 PM
To: Temkin, David
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] Automated tool for catching duplex mismatches on switc h
ports?


On Thu, Apr 24, 2003 at 03:41:41PM -0400, Temkin, David wrote:
> Thanks.  These are running in hybrid mode, and unfortunately we don't 
> get any message until the port goes errDisable, which is a little late 
> :-)
> 

	You may be able to say 'all' and have it not disable the port.

Router(config)#no errdisable detect cause ?
  all        Enable error detection on all cases
  dtp-flap   Enable error detection on dtp-flapping
  link-flap  Enable error detection on linkstate-flapping
  pagp-flap  Enable error detection on pagp-flapping

	- Jared

	


IMPORTANT:The information contained in this email and/or its attachments is
confidential. If you are not the intended recipient, please notify the
sender immediately by reply and immediately delete this message and all its
attachments.  Any review, use, reproduction, disclosure or dissemination of
this message or any attachment by an unintended recipient is strictly
prohibited.  Neither this message nor any attachment is intended as or
should be construed as an offer, solicitation or recommendation to buy or
sell any security or other financial instrument.  Neither the sender, his or
her employer nor any of their respective affiliates makes any warranties as
to the completeness or accuracy of any of the information contained herein
or that this message or any of its attachments is free of viruses.