[nsp] MLPPP bundle

[Stephen J. Wilcox]

What problem do you see?

(Not sure if you need the ppp mult/multilink-g 1 commands in the multilink 
interface..)

Steve

On Wed, 30 Apr 2003,  wrote:

> I have two T1's I want to bundle, I thought I had the config correct but I just couldn't get it to work. Here is the config I had. Any help would be greatly appreciated. Thanks,
> 
> James
> 
> int multilink 1
>   ip addr 64.x.x.x 255.255.255.252 
>   ppp multilink
>   multilink-group 1
>   no ppp multilink fragmentation
>   ip ospf message-digest-key 1 md5 7 xxxxxxxx
>   no shut
> 
> int s0/1
>   no ip addr
>   encap ppp
>   ppp multilink 
>   multilink-group 1
>   no shut
>  
> int s1/0
>   no ip addr
>   encap ppp
>   ppp multilink 
>   multilink-group 1
>   no shut
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>