[nsp] WS-2950-24 crypto image

[Larry Rosenman]

--On Sunday, August 03, 2003 10:20:17 +0200 Yuval Ben-Ari 
<yuvalba at netvision.net.il> wrote:

> Hi,
>
> I am trying to load image with SSH support to 2950.
> I tried the image: c2950-i6k2l2q4-mz.121-14.EA1.bin which requires
> 16M/8M (C2950 EI AND SI IOS CRYPTO IMAGE)
>
> during boot I get:
> FATAL ERROR ! Cannot run crypto images on this hardware configuration
>
> and then it keeps crashing in a loop.
>
> I cannot find any clear note on CCO about the requirments for using SSH
> on 2950.
> I suspect it requires the 2950C
> can someone confirm / explain.
>From Painful experience (I have a 2950-24 at home :-) ):

If the device runs the SI (Standard Image), you can't run crypto.

It's listed in one of the manuals that lists the difference between the SI 
and EI.

LER

>
> Thanks
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Larry Rosenman                     http://www.lerctr.org/~ler
Phone: +1 972-414-9812                 E-Mail: ler at lerctr.org
US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749