[nsp] testing WIC1-DSU-T1 w/ Kentrox DSU

[Daryl G. Jurbala]

WIC-whatever or Kentrox has anything to do with it.  If you want to
connect T1 interfaces back to back, you need a T1 cross-over cable.
1-5
2-4
3-3
4-2
5-1
6-6
7-7
8-8

Daryl G. Jurbala
Introspect.net Consulting
Tel: +1 215 825 8401
Fax: +1 508 526 8500
http://www.introspect.net

PGP Key: http://www.introspect.net/pgp 

-----Original Message-----
From: Eric L. Howard [mailto:elh at outreachnetworks.com] 
Sent: Friday, August 08, 2003 1:53 PM
To: cisco-nsp at puck.nether.net
Subject: SPAMWARNING:204.42.254.5:[nsp] testing WIC1-DSU-T1 w/ Kentrox
DSU


In testing a wic1-dsu back to back w/ a Kentrox - any special cable
pin-out needed?