[nsp] Netflow on E3 LC

[Majid Siddiq]

Hi,

I am unable to get any data when I enabled netflow on POS interfaces of ISE
card on 12410. IOS is 12.0.25S1.

Same result with 'sampled' option and 'direction'.

Any clue of what's going on ?  i have not searched the bug toolkit and have
not found any relevant bug.

IP packet size distribution (0 total packets):
   1-32   64   96  128  160  192  224  256  288  320  352  384  416  448
480
   .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000
.000

    512  544  576 1024 1536 2048 2560 3072 3584 4096 4608
   .000 .000 .000 .000 .000 .000 .000 .000 .000 .000 .000

IP Flow Switching Cache, 69636 bytes
  0 active, 1024 inactive, 0 added
  0 ager polls, 0 flow alloc failures
  Active flows timeout in 30 minutes
  Inactive flows timeout in 15 seconds
  last clearing of statistics 17:51:39
Protocol         Total    Flows   Packets Bytes  Packets Active(Sec)
Idle(Sec)
--------         Flows     /Sec     /Flow  /Pkt     /Sec     /Flow     /Flow

Actual flows can be seen on line cards only
        Do "attach <slot>" and re-enter the show command

regards
majid