[nsp] 3750 and IPv6

[Deepak Jain]

I have heard the same thing from the MRV folks. You have to use a Cisco SFP
for Cisco boxes (we had to wait to get our Cisco SFPs for our 3750) -- you
can use a 1000BaseT->optical converter from MRV or similar box.

DJ

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of
> Vytautas.Valancius at smn.lt
> Sent: Tuesday, August 12, 2003 5:52 AM
> To: dave.wilson at heanet.ie
> Cc: cisco-nsp at puck.nether.net
> Subject: RE: [nsp] 3750 and IPv6
>
>
> Hi,
>
> We have tried SFP SX tranceivers made by picoLight (sold by MRV). Complete
> failure. IOS now has some built in check if the SFP is from Cisco
> or not. So
> I guest its problem made by cisco, not some kind of reliability issue.
>
> >(On a similar topic: has anyone seen SFP SX GBICs so far?  All resellers
> >over here respond with "we can't ship any, there have been major
> reliability
> >problems with those that we shipped, and we're waiting for news from our
> >vendors...")
>
> Vytautas Valancius
> System Engineer / Consultant
> Santa Monica Networks
> Seimyniskiu str. 3, Vilnius, Lithuania
> Tel:+370-5-2638700, Mob:+370-612-99210
> www.smn.lt
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>