[nsp] Problems with static IP DSL config

[james]

I am having no luck bringing a customer up on the interface for customers receiving a static IP,
interface ATM1/IMA0.2 multipoint. Doing a "show arp" I only see "incomplete" for the addresses
assigned to BVI2, except for the IP assigned to BVI2 itself. Take a look at my config and 
see what I am missing.


c2600-js-mz.121-19.bin on a Cisco 2620
ip classless
ip subnet-zero
ip cef
!
bridge irb
ip dhcp pool valor
   network 65.a.b.0 255.255.255.0
   domain-name cybermesa.com
   default-router 65.a.b.1
   dns-server xxx.xxx.xxx.xxx   lease 0 6
!
interface ATM1/0
 no ip address
 no atm ilmi-keepalive
 ima-group 0
 no scrambling-payload
!
interface ATM1/1
 description Espanola Valor ATM T1 # 2
 no ip address
 no atm ilmi-keepalive
 ima-group 0
 no scrambling-payload
!
interface ATM1/IMA0
 no ip address
 atm ilmi-keepalive
 ima differential-delay-maximum 100
!
interface ATM1/IMA0.1 multipoint
 description Espanola DSL Bridged IMA group
 pvc 0/37
 !
 pvc 0/36
 !
<ect>
bridge-group 1
!
!
interface ATM1/IMA0.2 multipoint
 description static DSL customers
 no ip redirects
 no ip unreachables
 no ip mroute-cache
 pvc 0/39
  protocol ip 65.a.c.2 no broadcast
 !
 bridge-group 2
!
interface BVI1
 ip address 65.a.b.1 255.255.255.0
 no ip unreachables
 no ip proxy-arp
 arp timeout 3600
 clns mtu 1514
!
interface BVI2
 ip address 65.a.c.1 255.255.255.128
 no ip unreachables
 no ip proxy-arp
 arp timeout 3600
 clns mtu 1514
!

esp-dsl#sho ip route 65.a.c.0
Routing entry for 65.a.c.0/25
  Known via "connected", distance 0, metric 0 (connected, via interface)
  Redistributing via eigrp 101
  Routing Descriptor Blocks:
  * directly connected, via BVI2
      Route metric is 0, traffic share count is 1

esp-dsl#sho atm pvc 0/39
ATM1/IMA0.2: VCD: 170, VPI: 0, VCI: 39
UBR, PeakRate: 3000
AAL5-LLC/SNAP, etype:0x0, Flags: 0xC20, VCmode: 0x0
OAM frequency: 0 second(s), OAM retry frequency: 1 second(s), OAM retry frequency: 1 secon
d(s)
OAM up retry count: 3, OAM down retry count: 5
OAM Loopback status: OAM Disabled
OAM VC state: Not Managed
ILMI VC state: Not Managed
InARP frequency: 15 minutes(s)
Transmit priority 4
InPkts: 105, OutPkts: 27137, InBytes: 15451, OutBytes: 1892302
InPRoc: 104, OutPRoc: 27137, Broadcasts: 0
InFast: 1, OutFast: 0, InAS: 0, OutAS: 0
InPktDrops: 0, OutPktDrops: 0/0/0 (holdq/outputq/total)
CrcErrors: 0, SarTimeOuts: 0, OverSizedSDUs: 0
OAM cells received: 0
F5 InEndloop: 0, F5 InSegloop: 0, F5 InAIS: 0, F5 InRDI: 0
F4 InEndloop: 0, F4 InSegloop: 0, F4 InAIS: 0, F4 InRDI: 0
OAM cells sent: 0
F5 OutEndloop: 0, F5 OutSegloop: 0, F5 OutRDI: 0
F4 OutEndloop: 0, F4 OutSegloop: 0, F4 OutRDI: 0
OAM cell drops: 0
Status: UP
esp-dsl#




James Edwards
Routing and Security
jamesh at cybermesa.com
At the Santa Fe Office: Internet at Cyber Mesa
Store hours: 9-6 Monday through Friday
Phone support 365 days till 10 pm via the Santa Fe office:
505-988-9200 or Toll Free: 888-988-2700