[nsp] PIX fully mesh

[martin.schwarz at mscsoftware.com]

Dear all,

maybe sombody can help me. I am running a VPN with 30 506E hub and spoke to
a 515.
My vendor told me that in a hub and spoke config, connections between the
branch offices (506E)
are not possible, only connections to the hub site (515). Cisco plans to
implement this Q3/04 starting
with release 7.x

Workaround was to fully mesh every location.I started testing the fully
mesh with 10 sites and
it requires a great deal of manual work to config and verify every PIX. (
even if you are adding a site....)

My question :

Is there a tool to automate configs, push the config to the pix, and verify
the tunnels ?
Is CW able to do this ?

Any help would be appreciated.

Martin