[nsp] Monitor PIX firewall CPU using mrtg

[Paul van der Zel]

On Tue, Dec 09, 2003 at 11:56:54AM +0200, M.Palis wrote:
> Hello all
> 
> I am trying to monitor PIX firewall cpu using MRTG. Can anyone know the mib
> to use on mrtg in order to monitor the PIX CPU?

# All OIDs are taken from the following tree:
#  .iso.org.dod.internet.private.enterprises.cisco.
#  .1.3.6.1.4.1.9

#---------------------------------------------------------------
Target[pix1-cpu]:.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1&.1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:<community>
@<host>
RouterUptime[pix1-cpu]:<community>@<host>
Title[pix1-cpu]: pix1 CPU LOAD
PageTop[pix1-cpu]:<H1>itpix1-jhb : CPU Load %</H1>
MaxBytes[pix1-cpu]:100
ShortLegend[pix1-cpu]:%
XSize[pix1-cpu]:380
YSize[pix1-cpu]:100
YLegend[pix1-cpu]: CPU Utilization
Legend1[pix1-cpu]: 5 sec CPU load %
Legend2[pix1-cpu]: 1 min CPU load %
Legend3[pix1-cpu]: Maximal 5 sec CPU load %
Legend4[pix1-cpu]: Maximal 1 min CPU load %
LegendI[pix1-cpu]: 5 sec load:
LegendO[pix1-cpu]: 1 min load:
Options[pix1-cpu]: gauge, growright, nopercent

#---------------------------------------------------------------

Also have free mem, connections used and interface loading mrtg "bits" too. Contact 
off-list if req'd?

Regards,

Paul