[nsp] "ip verify unicast reverse-path" broken, or is it just me?

[Vincent De Keyzer]

... I was talking about the debug command (CEF is of course enabled,
otherwise the box does not accept the RPF command)

Isn't the debug going to crash my router? Maybe there is some other way to
check, with a show command for instance?

Vincent


> You have to enable it in order for this to work
> 
> 
> 
> -----Original Message-----
> From: Vincent De Keyzer [mailto:vincent at dekeyzer.net] 
> Sent: Monday, December 15, 2003 11:28 AM
> To: Mustafa at palnet.com; cisco-nsp at puck.nether.net
> Subject: RE: [nsp] "ip verify unicast reverse-path" broken, 
> or is it just me?
> 
> > are you sure CEF is working right?
> > 
> > What did debug ip cef drops rpf said on your access ?
> 
> Is it a safe thing to enable on a production router?
> 
> V