[nsp] vlans unreachable

[Roger]

Jack.W.Parks at alltel.com wrote:

>1. Check your dot1q trunks with "show interface trunk"  to make sure
>that the vlan is being trunked to the appropriate locations.
>2. What did you set you native vlan to?
>  
>

Native vlan is 1

And ah - yes ----

The problem was on the switch no other port was a part of vlan 201....  
Once one was created things were fine..

I'll have to do a little research on the nuances of dot1q trunking.  I 
was under the impression that as long as trunk was enabled things were set..

Thanks for the help!