[nsp] need to change a config line in snmp

[Pierfrancesco Caci]

:-> "Oliver" == Oliver Boehmer (oboehmer) <oboehmer at cisco.com> writes:

    >> I have to recover a silly mistake on an unmanned pop...
    >> Specifically, I need to change
    >> 
    >> line vty 0 4
    >> exec-timeout 0 0
    >> 
    >> to become a more sane "30 0"
    >> 
    >> or alternatively to kick out the hanged sessions
    >> 
    >> How can I do this in snmp ?

    > To clear a connection, you could use tsClrTtyLine within
    > OLD-CISCO-TS-MIB (1.3.6.1.4.1.9.2.9.10). Walk tsLineType (oid
    > .1.3.6.1.4.1.9.2.9.2.1.2) to find out which line are your vty's, but
    > usually 0/1 is aux and 2-6 is vty.

Great, the tsClrTtyLine worked. Thank you very much.

Pf

-- 


-------------------------------------------------------------------------------
 Pierfrancesco Caci | Network & System Administrator - INOC-DBA: 6762*PFC
 p.caci at seabone.net | Telecom Italia Sparkle - http://etabeta.noc.seabone.net/
     Linux paperino 2.4.20 #1 Mon Dec 2 17:02:14 CET 2002 i686 GNU/Linux