[nsp] cisco router dial script

[Gerald]

I'm setting up a 1700 with a modem hooked to the AUX port to dial up as
backup. The script (with total debugging appears to execute dialing in and
RADIUS shows the account authenticated but then the router hangs up anyway
complaining about unauthorized user "HiPer". I'll explain with logs:

4d00h: %LINK-3-UPDOWN: Interface Async5, changed state to up
4d00h: As5 DDR: Dialer statechange to up
4d00h: %DIALER-6-BIND: Interface As5 bound to profile Di1
4d00h: As5 DDR: Dialer call has been placed
4d00h: As5 PPP: Treating connection as a callout
4d00h: As5 PAP: O AUTH-REQ id 13 len 21 from "username"
4d00h: As5 PAP: I AUTH-REQ id 4 len 11 from "HiPer"
4d00h: As5 PAP: Authenticating peer HiPer
4d00h: As5 PAP: O AUTH-NAK id 4 len 27 msg is "Authentication
failure"Username HiPer not found
4d00h: TTY5: Async Int reset: Dropping DTR
4d00h: TTY5: Set DTR to 0



Dialing from a terminal session same login, same number:
atdt 12128129888
CONNECT 49333 V42bis

Welcome to 3Com Total Control HiPer ARC (TM)
Networks That Go The Distance (TM)

login: username
Password:
PPP session from  216.223.208.3 to  216.223.209.209
beginning...~^?}#?!}!}!} }?}!
}$}%?}"}&^?^?^?^?}%}&}$7?}'}"}(}"}1}$}%?}3}#} ?^?~~^?}#?!}!}"}
}?}!}$}%?}"}&^?^?^?^?}%}&}


Thanks for any assistance,

Gerald