[nsp] OSPF x firewall

[Jim Phillipo]

You could create tunnel interfaces on both routers and tunnel through the
firewall.

-----Original Message-----
From: Dmitri Kalintsev [mailto:dek at hades.uz]
Sent: Sunday, December 21, 2003 5:49 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [nsp] OSPF x firewall


OSPF will not establish adjacency with a neighbour in a different subnet
and/or mask on the same link, AFAIK. You may want to use IS-IS. ;)

On Thu, Dec 18, 2003 at 10:04:45PM -0200, Thales wrote:
> Folks, 
> 
> I have a area 0 with 2 routers running OSPF. Now , i need put a firewall
> in the midle. is it possible maintain this structure without change
> nothing and without need enable OSPF in the firewall ? Does Someome know a
> tip or a trick ? The subnet will be different.

SY,
-- 
D.K.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/